Closed cell spray foam


PCC™2000 - PurAcell 2000 Closed Cell

Closed-cell spray foam insulation is a great, efficient insulating material. PCC™2000 foam acts as a vapour barrier, insulation and air barrier all in one.

PCC™2000 foam adheres directly to the substrate that will form a seamless and permanent cover over and around even the most difficult shapes.
However, it only expands to 50 times its liquid volume it seals cracks and joints, and around protrusions such as brick ties to form a continuous insulating air barrier that remains for the life of the building.

PCC™2000has one the highest R-values per inch of any insulating material. This helps reduce energy costs while improving building comfort as well as indoor quality and comfort. The continuous air tight seal means that dust and other exterior pollutants can’t enter the building.

PCC ™2000is also a green product with a unique formula that contains no ozone-depleting chemicals, such as CFCs, HCFCs, or fibres, formaldehyde and asbestos. No toxins are emitted after installation. The substance never decomposes or deteriorates which means there are no concerns about harmful fibres or gases escaping into the air in the future. PCC™2000 foam also adds structural strength, and increases shear and racking strength by 300% to a building.

Closed Cell Foam is a strong and rigid spray insulation solution containing small pockets of gas that makes it very difficult for hot air or cold air to pass through it. It has a higher insulating value than open cell foam and creating a resistant barrier against water, vapor and the elements.


Closed-cell Foam PCC ™2000

Closed-cell polyurethane spray foam is one of the most efficient insulating materials commercially available. Closed-cell foam incorporates an insulating gas that is retained within the cells referred to as the blowing agent, which leads to the highly efficient insulating properties of the material. Also, as this foam is closed-cell it provides a highly effective air barrier, low moisture vapour permeability and excellent resistance to water.

The most common foam density for closed-cell polyurethane foam is approximately 41 kg/m. Closed-cell polyurethane foams are usually characterized by their rigidity and strength, in addition to the high R-Value. Also, studies show that wall racking strength can by doubled or tripled when closed cell foam is applied.

Due to the cell structure of closed cell foam; they have a low vapor permeance and may be considered a vapor retarder depending on the thickness and is used in exterior spray foam insulation applications.


Commercial spray foam usually use closed cell spray foam for industrial buildings, roofs and exterior insulation, giving a perfect seal against any problems such like draughts, moisture and rotting.

  • Excellent adhesion to substrate
  • Energy savings of up to 70%
  • Prevents thermal bridges
  • It reduces or eliminates heat transfer through building structures
  • Healthier living
  • Perfect airtight and vapor barrier
  • Reduces the cost of heating / cooling
  • Environmentally-friendly
  • Does not support mold growth

We use NASI certified insulation products


Quality Assured

Professional Service

Noise Reduction Insulation

Air Tightness Insulation

Cavity Wall Insulation

Roof Insulation

Loft Insulation

Ceiling Insulation

Suspended Floor Insulation

Timber Frame Insulation

Commercial Spray Insulation

Agricultural Insulation

Pipe insulation

New Build Insulation

Boat Insulation

Container insulation

Shed Insulation

External Wall Insulation

Scroll to top